Countersurveillance Probe/Monitor
CPM-700 Countersurveillance Probe/Monitor
Portable Sweep Kit
The CPM-700 Countersurveillance Probe/Monitor is a broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body bugs, video transmitters, and tape recorders. Portable Sweep Kit - provides everything needed to perform a professional sweep; fits inside a standard briefcase.
Multi-Functional Utility - Comes with probes to detect RF transmitters (audio and video), carrier current transmitters, and telephone bugs. Probes also available to detect for infrared transmitters, tape recorders, and acoustic leakage.
Wideband Coverage - from 200Hz to over 3GHz with no holes or gaps.
Monitor Mode - after a sweep, the alarm monitor (silent or audible alert) guards against new devices brought in or remote control activation of surveillance devices.
Auxiliary Audio Input - allows user to listen to telephones or lines for "hotmikes," hookswitch by-pass and "infinity" bugs. Unknown wires and cables can be tested for wired microphones.
Broadband receivers such as the CPM-700 provide a very important cost-effective tool for professional sweep teams, government security personnel, and private citizens with important security needs.
The CPM-700 is very effective for rapidly detecting and locating transmitted signals, while being very easy to learn to use. The CPM-700 sweep kit includes a custom Cordura case that contains all items necessary to conduct a professional sweep.
Available Models:
- (CPM-700) Countersurveillance Portable Sweep Kit (Sug. Retail $2,195.00 -- Our Price $2,025.95)
RF Probe Specifications:
| Gain: | 20dB nominal Frequency |
| Response: | 50kHz-2GHz ± 3dB 3Ghz-10dB |
| Sensitivity: | -62dBm (1 segment) -85dBm M.D.L. |
VLF Probe Specifications:
| Frequency Response: | 15kHz-1MHz-3dB |
| MAX Input Voltage: | 300 VAC 50-60Hz |
| Isolation: | 1500 VAC 60Hz |
| Sensitivity: | 38dBm (1 segment) -85dBm M.D.L. |
Audio Amplifier Specifications:
| Input Impedance: | 50K Ohm balanced |
| Input Range: | 1.7uV-10V (135dB) AGC |
| Dynamic Range: | 100dB (high and low gain) |
| Frequency Response: | 100Hz-15kHz ± 3dB (filtered) 500Hz-24dB/octave, 2.5kHz-18dB/octave |
| Headphone Output: | 5Vp-p 220 |
| Record Out: | 25 mVp-p nominal with AGC |
Display Specifications:
| LCD Bargraph: | 18 segment with pulsing single segment trip point |
| Dynamic Range: | 50dB (1 segment High Gain to MAX Low Gain) |
| Alert Output: | 2.8kHz tone or silent red LED at 2Hz |
| Remote Output: | N.O. contact (300mA 25V MAX) |
Battery Specifications:
| Requirements: | 8 ea. MN1500 AA Alkalline - Life 10-16 hrs. |
| Low Battery Indicator: | approx. 10% remaining power |
AC Adapter/Charger Specifications:
| Input: | 95-130VAC 50-60Hz, or 200-275VAC 50-60Hz |
| Output: | 12VDC with 500mA NiCad Recharge Time 8-10 hrs. |
Warranty:
The CPM-700 Countersurveillance Probe/Monitor comes with a standard ninety (90) day limited warranty against manufacturers defects.
Note: In accordance with United States Federal Laws (Title 18, Section 2512), covert security cameras may not record audio in a surreptitious manner. This means that audio may not be recorded in a stealthy, secret or clandestinely manner. Transmission ranges are based on unobstructed line of site transmission. Transmissions through walls or other obstacles may reduce the overall range of the transmitter. It is the buyers responsibility to check with state and local laws regarding the use of covert video surveillance equipment prior to purchasing from Hidden Cameras HQ.
No posts found
